Skip to main content

Retraction Note: Is it possible to control and optimize technology transfer process?

The Original Article was published on 08 August 2012

The Editor-in-Chief of the Journal of Innovation and Entrepreneurship retracts this article (De 2012) per the Committee on Publication Ethics (COPE) guidelines on plagiarism, due to unattributed use of substantial portions of text from the following article, by Shin, S. et al., Integrating the Lambert W Function to a Tolerance Optimization Problem (Quality and Reliability Engineering International 2005; 21: 795-808; Wiley Inderscience, DOI: 10.1002/qre.687). The Editor-in-Chief takes issues of research and publication misconduct seriously in order to preserve the integrity of the academic record. Our apologies are extended to the readers that this issue was not discovered before publication.

Reference

  • De, F. (2012). Is it possible to control and optimize technology transfer process? Journal of Innovation and Entrepreneurship, 1, 6.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Stefano De Falco.

Additional information

The online version of the original article can be found under doi:10.1186/2192-5372-1-6.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

De Falco, S. Retraction Note: Is it possible to control and optimize technology transfer process?. J Innov Entrep 5, 23 (2016). https://doi.org/10.1186/s13731-016-0052-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13731-016-0052-x